Macnica today announced, after 5 years since the release, Macnica's Mpression Odyssey MAX10 Eval Kit is going to the end of life with the last time buy on November 30, 2019. The Odyssey apps will stop its service on March 31, 2020 and the server will be shut down.
At that time even previously installed phone applications will stop functioning with Odyssey. If you have a concern with this, please contact us at info.mai@macnica.com.
NOTE: You can continue to use your Odyssey baseboard as an Intel MAX 10 development kit when powered on a breadboard. You will need a USB Blaster for programming, the schematics, and items listed in the “Tips and Tricks” section near the end of the Odyssey User Guide.
日本横滨(2018年11月1日)–Macnica,Inc.(总部:日本横滨小冈区1-6-3 Shin YOKOHAMA,总裁:中岛清)今天宣布推出最初开发的“EasyMVC”,---一个机器视觉摄像机开发工具包,使用户不仅可以快速评估和开发最先进的CMOS图像传感器,还可以快速评估和开发最先进的视觉接口——机器视觉摄像机的输出接口。
该工具包由三块板组成——图像传感器板、FPGA板和接口板。只需更改它们的组合,用户就可以评估影响机器视觉系统性能的组件,如各种传感器、IP和接口,而无需任何麻烦的设置工作。此外,由于Macnica提供硬件和软件的样本设计,它将有助于在短时间内以低成本进行开发。
Macnica为Intel®FPGA提供各种IP核,例如与索尼半导体解决方案公司(Sony Semiconductor Solutions Corporation)联合开发的“SLVS-EC”,全球首创“GigE Vision®”、“USB3 Vision®”和“CoaXPress®1.1.1”是构建机器视觉摄像头所需的全部功能。
用户s 可以使用EasyMVC轻松地开始评估这些IP核。
由于索尼领先的CMOS图像传感器具有非常高的规格,用户通常必须克服许多技术问题,例如难以有效提取图像数据的FPGA设计,以及根据每个传感器的不同引脚排列进行板设计,甚至在开始评估。在这种情况下,用户可以解决这些技术问题,并立即使用EasyMVC开始评估最新的传感器。
EasyMVC机器视觉摄像头套件的功能>
发布日期:2018年11月1日
EasyMVC将通过Macnica,Inc.或其子公司出售给全世界。
您将在2018年11月德国斯图加特的视觉展、慕尼黑的electronica交易会上看到实际操作的演示11月在德国ich举办,或12月在横滨举办2018年图像技术和设备国际技术展览会。
日本横滨(2016年11月17日)–Macnica,Inc.,半导体和网络产品的全球领先技术分销商,今天宣布,Mpression predictive maintenance introduction支持服务使用物联网传感设备作为Mpression物联网解决方案。Macnica完全支持以下菜单。
今天宣布,与IDC Frontier Inc.合作,向日本客户推出myThings starter kit konashi Edition,作为面向制造商的一款印象工具。该套件包含由Macnica公司开发的物联网传感器屏蔽“Uzuki”、蓝牙®智能模块“Koshian”和由Yukai Engineering公司开发的用于iOS设备的物理计算套件“konashi”。Macnica销售myThings入门套件konashi Edition通过Macnica在线商店。< / p > < / div >
今天宣布向日本客户提供Mpression OpenCL Lab。
Mpression OpenCL Lab是一个安全的环境,用户可以通过远程登录到服务器,安装Altera高端fpga硬件和必要的开发软件,开始开发基于OpenCL的加速项目。这使得用户能够立即评估OpenCL开发流程,而不需要任何前期投资,也不需要与准备环境相关的时间成本,包括Altera OpenCL SDK和FPGA开发套件。
目前,Mpression OpenCL Lab仅面向日本客户,因为服务和程序正在进行全面评估。评估期结束后,Mpression OpenCL实验室将向所有感兴趣的用户开放服务。
As the amount of data from smart phones and IoT devices explode, ever increasing load and power consumption have become a major issue in data centers. As one of the solutions for these issues, focus is falling on FPGAs as a key device for offloading the increasing burden on CPUs. The processing of large amounts of data can be streamlined by reconfiguring the FPGA hardware on the fly, targeting it for specific processing needs. By offloading processing transactions from CPU to FPGA, data center operators can decrease total cost of ownership through power savings, increasing processing performance per node, and by reducing additional server installation space. Additionally, use of OpenCL provides a means for software engineers to develop with FPGAs, enabling them to develop accelerator functions, which in turn significantly lowers the hurdles for securing development resources and expedites the process of development.
CPU: | Intel Core i7-6700 processor (4 cores, 3.4GHz) |
Memory: | DDR4, 2133MHz 64GB |
OS: | Ubuntu 14.04 LTS |
Software: | Quartus® Prime Standard edition v15.1.2 Altera SDK for OpenCL v15.1.2 |
FPGA board: | BittWare Stratix V FPGA board (Support for Arria® 10 FPGA in plan) |
Security: | SSL-VPN |